Mercedes Benz C-Class (W204) Training Manual: Manually operating the tilting/sliding roof or panoramic tilting/sliding roof

The drive is located above the overhead control panel.

• Pull the mirror base cover 1 down as far as possible and turn it to the side.

Legend

1. Mirror base cover

• Insert a thin plastic plate 1 in the rear end of the overhead control panel 2 in the center of the gap between the headliner and overhead control panel.
• Fold down the overhead control panel 2. The connectors do not have to be disconnected.
• Ensure that the key is removed from the ignition switch.

Legend

1. Plastic plate
2. Overhead control unit

• Remove the crank 1 from the owner's manual folder.
• Insert the crank 1 in the motor drive.
• Move the tilting/sliding roof by turning the crank in the appropriate direction.

Note: Only rotate the crank 1 slowly and without any jerking.

• Remove the crank.
• Replace and clip in the overhead control panel.
• Clip in the mirror base cover again.

Legend

1. Crank