Function of the DYNAMIC SELECT switch Mercedes-AMG vehicles: observe the notes in the Supplement. Otherwise, you may fail to recognize dangers. Use the DYNAMIC SELECT switch to change between the following drive programs:
The drive program selected appears in the multifunction display of the on-board computer. Depending on the drive program, the following systems change their characteristics:
Selecting the drive program
Configuring drive program I Multimedia system: Vehicle → DYNAMIC SELECT → Individual
Switching the operation feedback for drive program on/off Multimedia system: Vehicle → DYNAMIC SELECT
Displaying vehicle data Multimedia system: Vehicle → DYNAMIC SELECT
Displaying engine data Multimedia system: Vehicle → DYNAMIC SELECT
The values for engine output and engine torque may deviate from the nominal values. Items that can influence this are, for example:
|
Mercedes-Benz C-Class (W205) 2015 - 2021 Owners Manual > Changing a wheel: Raising the vehicle when changing a wheel
Requirements: There are no persons in the vehicle. The vehicle has been prepared for a wheel change. The hub caps have been removed. Important notes on using the jack: Use only the vehicle-specific jack that has been tested and approved by Mercedes-Benz to raise the vehicle. The jack is only designe ...