Unlocking and opening doors from the inside
Centrally locking and unlocking the vehicle
from the inside
- To unlock: press button 1.
- To lock: press button 2.
This does not lock or unlock the fuel filler flap.
The vehicle is not unlocked:
- If you have locked the vehicle using the
SmartKey.
- If you have locked the vehicle using KEYLESS-
GO.
Locking/unlocking the vehicle with KEYLESS-
GO
Requirements
- The SmartKey is outside the vehicle.
- The distance between the SmartKey and the
vehicle does not exceed 3 ft (1 m).
- The driver's door and the door at which the
door handle is used are closed.
- To unlock the vehicle: touch the inner surface
of the door handle.
- To lock the vehicle: touch sensor surface
1 or 2.
- Convenience closing: touch recessed sensor
surface 2 until the closing procedure is
complete
Further information on convenience closing.
If you open the trunk lid from outside it is automatically
unlocked.
Problems with KEYLESS-GO
Problem |
Possible causes/consequences and ► Solutions |
You can no longer lock or unlock the
vehicle using KEYLESS-GO. |
Possible causes are:
- The SmartKey functions have been deactivated.
- The SmartKey battery is discharged or nearly discharged.
- There is interference from a powerful radio signal source.
- The SmartKey is faulty.
- Activate the SmartKey functions.
- Check the battery using the battery check lamp and replace if
necessary.
- Use the emergency key to unlock or lock the vehicle.
- Have the vehicle and SmartKey checked at a qualified specialist
workshop.
|
Activating/deactivating the automatic locking
feature
The vehicle is locked automatically when the
ignition is switched on and the wheels are turning
faster than walking pace.
- To activate: press and hold button 2 for
approximately five seconds until an acoustic
signal sounds.
- To deactivate: press and hold button 1 for
approximately five seconds until an acoustic
signal sounds.
In the following situations, there is a danger of
being locked out when the function is activated:
- While the vehicle is being tow started/
pushed.
- The vehicle is being tested on the dynamometer.
Locking/unlocking the driver's door with the
emergency key
If you wish to lock the vehicle entirely using
the emergency key, first press the button for
locking from the inside while the driver's
door is open. Then proceed to lock the driver's
door using the emergency key.
- Insert the emergency key as far as it will go
into opening 1 in the cover.
- Pull and hold the door handle.
- Pull the cover on the emergency key as
straight as possible away from the vehicle
until it releases.
- Release the door handle.
- To unlock: turn the emergency key counterclockwise
to position 1.
- To lock: turn the emergency key clockwise to
position 1.
- Carefully press the cover onto the lock cylinder
until it engages and is seated firmly.
|