Wi-Fi connection overview You can use Wi-Fi to establish a connection with a Wi-Fi network and to access the Internet or other network devices. The following connection options are available:
To establish a connection, you can use the following methods:
Setting up Wi-Fi Requirements:
Multimedia system: → System → Connectivity Activating/deactivating Wi-Fi
Connecting the multimedia system with a device via Wi-Fi This function is available if a HERMES communication module is not installed. The type of connection established must be selected on the multimedia system and on the device to be connected. The connection procedure may differ depending on the device. Follow the instructions that are shown in the display. Further information (see the manufacturer's operating instructions).
Using a security key
All devices support a security key as a means of connection. Using a WPS PIN
Using a button This function is only available in a Wi-Fi frequency of 2.4 GHz.
Device has already been connected:
Setting up a Wi-Fi hotspot Multimedia system: System → Connectivity Configuring the multimedia system as a Wi-Fi hotspot The type of connection established depends on the device to be connected. The function must be supported by the multimedia system and by the device to be connected. The type of connection established must be selected on the multimedia system and on the device to be connected.
Generating a WPS PIN
Connecting using a WPS PIN
Connecting using a button Requirements
Connecting using a security key
Connecting using NFC
Generating a new security key:
|
Mercedes Benz C-Class (W204) Training Manual > Chassis: Brake System
Service brakes The brake system for the sedan in the new C-Class with the hydraulic dualcircuit brake and the division into two brake circuits for front and rear axle largely corresponds to the previous version. All versions are equipped with floating caliper brakes at the front and rear. Service in ...